Medical gauze swab is a medical product for wound treatment，And protect the wound well.Medical gauze swab have higher requirements for materials and are more convenient to use.At the same time, the medical gauze swab should pay attention to the following problems during the production process.
In the manufacturing process of medical gauze swab, the “alkali boiling” of gauze is a very important process. The purpose is to remove the slurry, grease and wax in the grey cloth, which directly affects the quality of medical gauze. At the same time, there are many pollutants produced in this process, which need special attention in work.
In order to reduce the amount of pollutants produced during the production of medical gauze swab, the gauze grey cloth produced now is often completed by a series of processes such as steam steaming, water washing and bleaching after degreasing, dewaxing and slurry removal in a high-temperature cylinder. The pollutants from the previous process are often brought to the next section to ensure that the gauze meets the required sanitary standards and product quality, More clean water must be used for cleaning.
In addition, the medical gauze block must be strictly tested and inspected before leaving the factory. It has soft hand feeling, strong water absorption, uniform weft density, white and tasteless, no acid and alkali, and is safe to use. The sparse pure cotton gauze grey cloth is selected. After selecting the qualified and applicable gauze, it is subject to chlorine oxygen double bleaching (degreasing), and then the degreased gauze grey cloth is mechanically divided into strips, and then cut into corresponding medical gauze blocks according to the required specifications.
Post time: Mar-29-2022